google-site-verification: googled2d8dec56546c4f2.html SUSTAMID PA66 Natural Nylon | www.eplas.com.au | Australia

SUSTAMID® PA66

PA66 Nylon

SUSTAMID® Nylon Type 66 is made from a highly viscous polymer that offers outstanding strength and tenacious properties over a wider temperature range and is also resistant to most chemicals and corrosive media.

SUSTAMID® Nylon Type 66 is preferred for automatic lathe and repetition work.

 

Proven Industry Performer

Mechanical Engineering, Offshore, Electrical, Electronics, Vehicle Construction / Automotive Industries: Cars, Trucks, Forklifts, Conveying, Heavy Crane Industry, Repetition Machining, Heavy Haulage, Dairy Industry, Meat Works, Food Processing, Bottling

 

Applications

  • Friction Bearings, Gears

  • Slider Plates

  • High-Pressure Guide Rails

  • Wheels

  • Rollers

  • Electrical Insulators

  • Pump Bearings

    

Properties

  • Highest stiffness and hardness within the non-reinforced polyamides group

  • Highest creep resistance within the non-reinforced polyamides group

  • Low impact strength and mechanical damping

  • Excellent service temperature range of -30°C to 95°C with short-term peak excursions to 170°C

  • Good long term behaviour to heat ageing

  • High resistance to oils, greases, aliphatic / aromatic and most halogenated hydrocarbons

  • Not resistant to strong acids

  • Excellent dimensional stability

  • Less impact resistance than type 6

  • Excellent sliding properties

  • Low deformation under load and compression

  • High wear resistance

  • Good bearing properties

  • Excellent electrical insulating properties

  • EC & FDA approved for food applications

E-Plas P/L © 2019