google-site-verification: googled2d8dec56546c4f2.html PTFE 25% Glass Filled | www.eplas.com.au | Australia

PTFE 25% GLASS FILLED

Milled glass fibres have the least effect on chemical and electrical properties and add greatly to the mechanical strength of Virgin or unfilled PTFE.

 

The addition of glass improves compressive properties and creep strength by as much as 40% and improves wear resistance dramatically.

 

Although resistant to acids and oxidation, it can be attacked by alkali.

 

 

Proven Industry Performer

Pumping / Pump Manufacture, Pipe Fixtures/Supports, Laboratory Equipment, Bearings

Applications

  • Shaft Seals

  • Gaskets

  • Bridge Bearings

  • Slide Bearings

  • Bushes

  • Laboratory Parts

  • Pipe Supports, Piston Rings

  • Piston Rod Packings in Compressor Plunger

      Pumps & Valves

Properties

  • Non-stick

  • Non-toxic

  • Hydrophopic

  • Higher compressive strength

  • Higher hardness

  • Improved wear and abrasion resistance

  • Increased dimensional stability

  • Lower linear thermal expansion

  • Improved thermal stability

  • Not approved for food contact applications

  • Slightly lower electrical properties compared to

      Virgin unfilled grade

  • Abrasive against mating surfaces when compared to

      Virgin unfilled grade

​​

E-Plas P/L © 2019