google-site-verification: googled2d8dec56546c4f2.html SUSTAMID 6G OL Nylon | www.eplas.com.au | Australia

SUSTAMID® 6G OL

6G Cast Nylons

Sustamid® 6G OL is a highly modified grade with an incorporated internal oil-based lubricant evenly distributed throughout the polymeric mix in the form of microscopic droplets.

Sustamid®  6G OL is a distinctive Yellow in colour.

A fluid lubricant is advantageous in lowering the coefficient of friction and where a reduction in the phenomena known as "stick - slip" is a priority.

 

For Sustamid®  6G OL to be effective, the application must have constant speed and pressure to activate the liquid lubricant. If the application does not have these constants then the effectiveness of this grade may be reduced.

 

Low load, high speed and low temperature slide or journal bearings.

​​​​​​​Proven Industry Performer

Mechanical Engineering, Offshore, Electrical, Electronics, Vehicle Construction / Automotive Industries: Cars, Trucks, Forklifts, Conveying, Heavy Crane Industry, Repetition Machining, Heavy Haulage, Dairy Industry, Meat Works, Food Processing, Bottling

 

Applications

  • Sliding Parts - Slide or Journal Bearings

  • Cable Winches

  • Lifting Gears

  • Rope Pulleys

  • Conveyor Stars

  • Spiral Conveyors

  • Insulation bushing

  • Gears & Sprockets

  • High speed chain guides that exceed 100 feet per minute

  • Crane pulleys ( sheaves )

  • Bearing both in linear and circular

  • High impact pile driving

  • Bearing pads

  • High load packing blocks up to 13 ton per square inch of load bearing

  • Meat Works

  • Bottling

  • Truck pads and shackle bushes

    

Properties

  • Excellent abrasion resistance

  • Very good mechanical strength

  • Very good chemical, thermal and low friction properties

  • Excellent bearing material

  • Excellent short-term and long-term heat resistance

  • High stiffness at elevated temperatures

  • High creep resistance, especially at elevated temperatures

  • Outstanding toughness

  • Excellent fatigue behaviour

  • Good resistance to chemicals

  • A high PV rating

  • Very good co-efficient of friction

  • Excellent electrical insulation properties

E-Plas P/L © 2019