Home | About Us | Contact Us
You are here: Home > Sustaplast Engineering Plastics > Sustamid Nylons > Sustamid® - Sustaglide®

Sustamid® - Sustaglide®

SUSTAGLIDE® is a highly modified caprolactum grade, incorporating a lubricating "particulate matrix", that is evenly distributed throughout the polymer that further reduces the sliding coefficient of friction.

SUSTAGLIDE® is Green in colour.

PROPERTIES: In comparison with Sustamid 6 GOL , SUSTAGLIDE® utilises different sliding additives which enable higher loads and sliding face temperatures, thus providing optimum performance with respect to wear and friction coefficient.

This grade has 5 times higher Pressure-Velocity capability over standard Sustamid® PA6 G type.

According to EC and FDA regulations,  SUSTAGLIDE® is suitable for use in contact with food.

APPLICATION: Sliding parts under high load such as wear pressure plates, slide bearings and journal bearings.

 

DOWNLOAD DATA SHEET