Home | About Us | Contact Us
You are here: Home > Miscellaneous Materials > Thermoforming

Thermoforming

Thermoforming of sheet materials can be achieved through drape forming, vacuum forming, pressure forming or bladder forming.

Thermoforming is extremely useful when large parts are required and injection moulding is not possible and when short runs are required which can be achieved using low cost tooling.

The materials available for E-Plas Pty.Ltd. can be formed by one or all of the aforementioned methods and encompass low, medium and high sheet cost products however, should the application require more sophisticated alloys or new generation materials, you can be certain that it can be supplied by E-Plas.