Home | About Us | Contact Us
You are here: Home > Sustaplast Engineering Plastics > Sustamid Nylons > SustamidŽ PA 6 MO Extruded

SustamidŽ MO Extruded Type 6

This grade contains a Molybdenum Disulphide additive which is evenly distributed through the material. The result being a material having additional properties over standard virgin grade. This grade can be characterised by the following properties:

  • Higher stiffness
  • Lower thermal expansion
  • Enhanced sliding properties especially during "dry running"
  • Better abrasion resistance
  • better machineability
  • Excellent wear resistance
  • Higher dynamic load bearing capacity
  • Lower elongation
  • Slightly higher hardness

Fields of application: gears, pinions, rollers, bearings, sliding elements, sealing washers, bearing shells & valves.